please help me and my cpu

[Y A Y O 244]

https://gyazo.com/c39141eeec38b1cdc02cba88aa4cf046

help

[marhanen 6]

On mine the cooler had come loose. I had to clean, paste and reseat it. Then it was fine

[Y A Y O 244]

  On 9/15/2020 at 2:23 AM, marhanen said:

On mine the cooler had come loose. I had to clean, paste and reseat it. Then it was fine

Expand  

I checked the cooler and its completely fan. Maybe a little dusty on the top but nothing crazy

I have an i7 7700k and ive heard that theyre known for overheating

Im planning on switching over to amd for more cores but that will also require a new mother board so not excited for that

I just put all my fans into max power so hopefully that does something

 

[Deluxe 34]

yikes

[gaz 522]

Yeah this happened to me, for short term, get a fan and point it at ur PC. Pretty ghetto solution but it worked for me. Other than that ur fan isnt working properly clearly and you need to figure out what the problem is

[Monks 1662]

Reapply thermal paste and get a new cooler.

[Joce 256]

https://www.corsair.com/ca/en/Categories/Products/Liquid-Cooling/Dual-Radiator-Liquid-Coolers/Hydro-Series™-H115i-280mm-Extreme-Performance-Liquid-CPU-Cooler/p/CW-9060027-WW

 

[marhanen 6]

  On 9/15/2020 at 2:29 AM, Y A Y O said:

I checked the cooler and its completely fan. Maybe a little dusty on the top but nothing crazy

I have an i7 7700k and ive heard that theyre known for overheating

Im planning on switching over to amd for more cores but that will also require a new mother board so not excited for that

I just put all my fans into max power so hopefully that does something

 

Expand  

 

Mine felt fine when I tried to wiggle it with it still bolted on too, but when I took it off and put new thermal paste and rebolted it down it fixed my overheating 

 

So even if it feels fine it's still  a good idea to do if your fan runs

[Y A Y O 244]

  On 9/15/2020 at 11:15 AM, Joce said:

https://www.corsair.com/ca/en/Categories/Products/Liquid-Cooling/Dual-Radiator-Liquid-Coolers/Hydro-Series™-H115i-280mm-Extreme-Performance-Liquid-CPU-Cooler/p/CW-9060027-WW

 

Expand  

I have a corsair liquid cooling for my cpu i have the h100x i believe

  On 9/15/2020 at 11:35 AM, marhanen said:

 

Mine felt fine when I tried to wiggle it with it still bolted on too, but when I took it off and put new thermal paste and rebolted it down it fixed my overheating 

 

So even if it feels fine it's still  a good idea to do if your fan runs

Expand  

ok ill try that and ill reapply thermal paste

its probably time to switch to a better cpu soon because 4 cores is pretty bummy as of 2020 standards i think

[PoptartRex 3294]

Do you have it overclocked at all?

or by that, do you know what motherboard you have? Some manufacturers like to do custom OCs on a CPU. 

[Y A Y O 244]

  On 9/15/2020 at 4:27 PM, PoptartRex said:

Do you have it overclocked at all?

or by that, do you know what motherboard you have? Some manufacturers like to do custom OCs on a CPU. 

Expand  

No oc that I know of

and z170x gigabyte 6 

^something like that 

[sleazy turd racoon 383]

  On 9/15/2020 at 2:29 AM, Y A Y O said:

I checked the cooler and its completely fan. Maybe a little dusty on the top but nothing crazy

I have an i7 7700k and ive heard that theyre known for overheating

Im planning on switching over to amd for more cores but that will also require a new mother board so not excited for that

I just put all my fans into max power so hopefully that does something

 

Expand  

bad paste? check that

what cooler do you have?

[Y A Y O 244]

  On 9/15/2020 at 7:01 PM, Rogue Sweden said:

bad paste? check that

what cooler do you have?

Expand  

corsair h100 something something 

liquid cooling good cooler

[marhanen 6]

Can u see/hear/feel the pump (not the fan) moving fluid, cause that might have failed

 

Make sure you don't go overboard on cores, and read the fine detail specs cause some CPUs run at low clock speeds when in full use and only boosts 1 or 2 cores to the package listed boost speed

Arma 3 only uses 4 individual cores so others will be used for other activities

Newer Gen do have improved instruction coding which will give better performance per clock speed from what you have but not by alot

[Noble 1898]

Try putting some thermal paste on your CPU pins, at this point what do you have to lose, ETA on housefire? 

[Y A Y O 244]

  On 9/16/2020 at 12:12 AM, marhanen said:

Can u see/hear/feel the pump (not the fan) moving fluid, cause that might have failed

 

Make sure you don't go overboard on cores, and read the fine detail specs cause some CPUs run at low clock speeds when in full use and only boosts 1 or 2 cores to the package listed boost speed

Arma 3 only uses 4 individual cores so others will be used for other activities

Newer Gen do have improved instruction coding which will give better performance per clock speed from what you have but not by alot

Expand  

I'll look more into it 

I haven't tried feeling the pump

[Noble 1898]

Also if you play S1, cpu is prob melting due to CTF, Myst inc in sophia 70 hatchbacks deep to block MSR